Filtration/esphome-web-bb04f0.yaml

substitutions:
  name: thr320d_filtre_bb04f0
  friendly_name: Filtration"
  project_name: "Filtration piscine"
  project_version: "1.0"
  light_restore_mode: RESTORE_DEFAULT_OFF

esphome:
  name: "${name}"
  # supply the external temp/hum sensor with 3v power by pulling this GPIO high
  on_boot:
    - priority: 90
      then:
      - switch.turn_on: ${name}_sensor_power

esp32:
  board: nodemcu-32s

api:
  encryption:
    key: "zOAo/IyJfGlFafVzPae/pCJZQtGFRWc7i+O9ZXfRY+c="

ota:
  - platform: esphome
    password: "5e0d993d03804b33e56142c07cae7526"

logger:
  baud_rate: 0

web_server:
  port: 80
  version: 3
  log: off
  ota: off
  local: true
  auth:
    username: !secret web_server_user_piscine
    password: !secret web_server_pass_piscine

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: !secret ap_ssid_pool
    password: !secret ap_pass_pool

captive_portal:

one_wire:
  - platform: gpio
    pin: GPIO25

# This will take care of the display automatically.
# You don't need to tell it to print something to the display manually.
# It'll update every 60s or so.
display:
  platform: tm1621
  id: tm1621_display
  cs_pin: GPIO17
  data_pin: GPIO5
  read_pin: GPIO23
  write_pin: GPIO18
  lambda: |-
    it.printf(0, "%.1f", id(${name}_temp).state);
    it.display_celsius(true);
    if (id(sntp_time).now().is_valid()) {
      it.printf(1, "%1.f", id(duree).state);
    }

binary_sensor:
  # single main button that also puts device into flash mode when held on boot
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    name: "Boutton"
    internal: True
    on_click:
      - min_length: 500ms # long press
        max_length: 2s
        then:
          - switch.toggle: mainRelayVirt
      - min_length: 5s # very long press to reset
        max_length: 10s
        then:
          - switch.turn_on: ${name}_restart
    on_double_click:
      then:
        switch.toggle: dryContRelay

switch:
  # virtual switch to represent the main relay
  # as far as I know, we have no way to confirm the real state
  - platform: template
    id: mainRelayVirt
    name: "Pompe"
    turn_on_action:
      - switch.turn_on: mainRelayOn
      - switch.turn_on: ${name}_pompe_led
    turn_off_action:
      - switch.turn_on: mainRelayOff
      - switch.turn_off: ${name}_pompe_led
    assumed_state: True
    optimistic: True
    icon: mdi:pump
    web_server_sorting_weight: 10

  # internal momentary switch for main relay ON
  - platform: gpio
    id: mainRelayOn
    internal: True
    pin:
      number: GPIO19
    on_turn_on:
      - delay: 500ms
      - switch.turn_off: mainRelayOn
    restore_mode: ALWAYS_OFF

  # internal momentary switch for main relay OFF
  - platform: gpio
    id: mainRelayOff
    internal: True
    pin:
      number: GPIO22
    on_turn_on:
      - delay: 500ms
      - switch.turn_off: mainRelayOff
    restore_mode: ALWAYS_OFF

  # dry contact relay switch
  - platform: gpio
    id: dryContRelay
    name: "Sortie auxiliaire"
    icon: mdi:cards-diamond
    web_server_sorting_weight: 15
    pin:
      number: GPIO4
    on_turn_on:
      - switch.turn_on: ${name}_aux_led
    on_turn_off:
      - switch.turn_off: ${name}_aux_led
    restore_mode: ALWAYS_OFF

  # Leftmost (red) LED that's used to indicate the relay being on/off
  - platform: gpio
    id: ${name}_pompe_led
    pin:
      number: GPIO16
      inverted: true

  # Rightmost (green) LED; use as dry contact indicator
  - platform: gpio
    id: ${name}_aux_led
    pin:
      number: GPIO13
      inverted: true

  # This is needed to power the external temp/humidity sensor.
  # It receives 3v from this pin, which is pulled up on boot.
  # TODO: This should probably be an internal switch.
  - platform: gpio
    pin: GPIO27
    id: ${name}_sensor_power
    restore_mode: ALWAYS_OFF

  - platform: restart
    name: "Redémarrer"
    id: ${name}_restart
    icon: "mdi:restart"


sensor:
  - platform: dallas_temp
    name: "Température eau"
    id: ${name}_temp
    address: 0xfe3ce504578d3c28
    update_interval: 1s
    web_server_sorting_weight: 05
    icon: mdi:pool-thermometer

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "Addresse IP"
      disabled_by_default: true
      icon: mdi:ip-network

number:
  - platform: template
    name: "Heure démarrage"
    id: heure_depart
    min_value: 0
    max_value: 59
    step: 1
    restore_value: True
    initial_value: 8
    unit_of_measurement: s
    mode: box
    optimistic: True
    icon: mdi:clock-start
    web_server_sorting_weight: 20

  - platform: template
    name: "Durée de base"
    id: duree_debase
    min_value: 0
    max_value: 60
    step: 1
    restore_value: False
    initial_value: 0
    unit_of_measurement: s
    optimistic: True
    internal: True

  - platform: template
    name: "Durée filtration H/j"
    id: duree
    min_value: 0
    max_value: 60
    step: 1
    restore_value: False
    initial_value: 0
    unit_of_measurement: s
    mode: SLIDER
    optimistic: True
    entity_category: config
    icon: mdi:fan-clock
    web_server_sorting_weight: 25

  - platform: template
    name: "Heure actuelle"
    id: heure
    internal: True
    min_value: 0
    max_value: 59
    step: 1
    unit_of_measurement: s
    optimistic: True

  - platform: template
    name: "Heure fin filtration"
    id: heure_fin
    internal: True
    min_value: 0
    max_value: 59
    step: 1
    unit_of_measurement: s
    optimistic: True

select:
  - platform: template
    name: "Mode"
    id: mode
    optimistic: true
    options:
      - Forcé
      - Intensif
      - Normal
      - Économique
      - Arrêt
    initial_option: Normal
    icon: mdi:power
    web_server_sorting_weight: 2
    on_value:
      then:
        - lambda: |-
            if (id(mode).state == "Intensif") {
              id(duree).state = id(duree_debase).state + 2;
              if (id(duree).state > 59) {
                id(duree).state = 60;
              }
            }
            if (id(mode).state == "Normal") {
              id(duree).state = id(duree_debase).state;
            }
            if (id(mode).state == "Économique") {
              id(duree).state = id(duree_debase).state - 2;
              if (id(duree).state < 0) {
                id(duree).state = 0;
              }
            }

time:
  - platform: sntp
    id: sntp_time
    timezone: Europe/Paris
    servers:
     - 0.pool.ntp.org
     - 1.pool.ntp.org
     - 2.pool.ntp.org


interval:
  - interval: 1s
    then:
      - lambda: |-
          if (id(mode).state == "Forcé") {
              id(mainRelayVirt).turn_on();
          }

          if ((id(mode).state == "Normal") || (id(mode).state == "Économique") || (id(mode).state == "Intensif")) {
            if (id(sntp_time).now().second == (id(heure_depart).state)) {
              id(duree_debase).state = (id(${name}_temp).state / 2);
              id(duree).state = id(duree_debase).state;
            }

            ESP_LOGI("main", "Heure de début: %.0f", id(heure_depart).state);
            id(heure_fin).state = id(heure_depart).state + (id(duree).state) -1;
            ESP_LOGI("main", "Heure de fin: %.0f", id(heure_fin).state);
            if (id(heure_fin).state > 59) {
              id(heure_fin).state = id(heure_fin).state - 60;
            }
            ESP_LOGI("main", "Heure de fin: %.0f", id(heure_fin).state);
            if (id(heure_fin).state >= id(heure_depart).state) {
              if (((id(sntp_time).now().second) >= (id(heure_depart).state)) and ((id(sntp_time).now().second) <= (id(heure_fin).state))) {
                id(mainRelayVirt).turn_on();
              }
              else {
                id(mainRelayVirt).turn_off();
              }
            }
            else {
              if ((id(sntp_time).now().second) >= (id(heure_depart).state)) {
                id(mainRelayVirt).turn_on();
              }
              else {
                if ((id(sntp_time).now().second) <= (id(heure_fin).state)) {
                  id(mainRelayVirt).turn_on();
                }
                else {
                  id(mainRelayVirt).turn_off();
                }
              }
            }
          }

          if (id(mode).state == "Arrêt") {
              id(mainRelayVirt).turn_off();
          }