modes : forcé, normal +et-, arrêt

esphome-web-bb04f0.yaml

@@ -1,6 +1,6 @@
 substitutions:
   name: thr320d_filtre_bb04f0
-  friendly_name: "filtration"
+  friendly_name: Filtration"
   project_name: "Filtration piscine"
   project_version: "1.0"
   light_restore_mode: RESTORE_DEFAULT_OFF
@@ -29,11 +29,19 @@ logger:
 
 web_server:
   port: 80
+  version: 3
+  log: off
+  ota: off
+  local: true
+  auth:
+    username: !secret web_server_user_piscine
+    password: !secret web_server_pass_piscine
 
 wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password
 
+
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: !secret ap_ssid_pool
@@ -58,10 +66,9 @@ display:
   lambda: |-
     it.printf(0, "%.1f", id(${name}_temp).state);
     it.display_celsius(true);
-    /*it.printf(1, "%.1f", id(${name}_temp).state/10);
+    if (id(sntp_time).now().is_valid()) {
-    /*it.display_kwh(true);
+      it.printf(1, "%1.f", id(duree).state);
-    /*it.printf(1, "%.1f", id(${name}_humi).state);
+    }
-    it.display_humidity(true);*/
 
 binary_sensor:
   # single main button that also puts device into flash mode when held on boot
@@ -70,21 +77,20 @@ binary_sensor:
       number: GPIO0
       mode: INPUT_PULLUP
       inverted: True
-    name: "${friendly_name} Button"
+    name: "Boutton"
+    internal: True
     on_click:
-      - max_length: 350ms # short press to toggle the relay
+      - min_length: 500ms # long press
+        max_length: 2s
         then:
-          switch.toggle: mainRelayVirt
+          - switch.toggle: mainRelayVirt
-      - min_length: 360ms # long press to do...
+      - min_length: 5s # very long press to reset
-        max_length: 3s
+        max_length: 10s
-        then:
-          switch.toggle: dryContRelay
-      - min_length: 10s # very long press to reset
-        max_length: 20s
         then:
           - switch.turn_on: ${name}_restart
-  - platform: status
+    on_double_click:
-    name: "${friendly_name} Status"
+      then:
+        switch.toggle: dryContRelay
 
 switch:
   # virtual switch to represent the main relay
@@ -94,14 +100,14 @@ switch:
     name: "Pompe"
     turn_on_action:
       - switch.turn_on: mainRelayOn
-      - switch.turn_on: ${name}_onoff_led
+      - switch.turn_on: ${name}_pompe_led
     turn_off_action:
       - switch.turn_on: mainRelayOff
-      - switch.turn_off: ${name}_onoff_led
+      - switch.turn_off: ${name}_pompe_led
     assumed_state: True
     optimistic: True
-    #restore_state: True
+    icon: mdi:pump
-    #restore_mode: ALWAYS_ON
+    web_server_sorting_weight: 10
 
   # internal momentary switch for main relay ON
   - platform: gpio
@@ -128,24 +134,27 @@ switch:
   # dry contact relay switch
   - platform: gpio
     id: dryContRelay
-    name: "Extension"
+    name: "Sortie auxiliaire"
+    icon: mdi:cards-diamond
+    web_server_sorting_weight: 15
     pin:
       number: GPIO4
     on_turn_on:
-      - switch.turn_on: ${name}_ext_led
+      - switch.turn_on: ${name}_aux_led
     on_turn_off:
-      - switch.turn_off: ${name}_ext_led
+      - switch.turn_off: ${name}_aux_led
+    restore_mode: ALWAYS_OFF
 
   # Leftmost (red) LED that's used to indicate the relay being on/off
   - platform: gpio
-    id: ${name}_onoff_led
+    id: ${name}_pompe_led
     pin:
       number: GPIO16
       inverted: true
 
   # Rightmost (green) LED; use as dry contact indicator
   - platform: gpio
-    id: ${name}_ext_led
+    id: ${name}_aux_led
     pin:
       number: GPIO13
       inverted: true
@@ -156,21 +165,13 @@ switch:
   - platform: gpio
     pin: GPIO27
     id: ${name}_sensor_power
-    restore_mode: ALWAYS_ON
+    restore_mode: ALWAYS_OFF
 
   - platform: restart
-    name: "Filtration Restart"
+    name: "Redémarrer"
     id: ${name}_restart
     icon: "mdi:restart"
 
-light:
-  # The middle (blue) LED is used as wifi status indicator.
-  - platform: status_led
-    id: wifi_status_led
-    name: "Wifi"
-    pin:
-      number: GPIO15
-      inverted: true
 
 sensor:
   - platform: dallas_temp
@@ -178,62 +179,165 @@ sensor:
     id: ${name}_temp
     address: 0xfe3ce504578d3c28
     update_interval: 1s
-
+    web_server_sorting_weight: 05
-climate:
+    icon: mdi:pool-thermometer
-  - platform: thermostat
-    name: "${friendly_name} Climate"
-    sensor: ${name}_temp
-    default_preset: Home
-    preset:
-      - name: Home
-        default_target_temperature_low: 31 °C
-        mode: heat
-    min_heating_off_time: 300s
-    min_heating_run_time: 300s
-    min_idle_time: 30s
-    heat_action:
-      - switch.turn_on: mainRelayVirt
-    idle_action:
-      - switch.turn_off: mainRelayVirt
-    heat_deadband: 0.5 # how many degrees can we go under the temp before starting to heat
-    heat_overrun: 0.5 # how many degrees can we go over the temp before stopping
 
 text_sensor:
   - platform: wifi_info
     ip_address:
       name: "Addresse IP"
       disabled_by_default: true
+      icon: mdi:ip-network
 
-interval:
+number:
-  - interval: 30s
+  - platform: template
+    name: "Heure démarrage"
+    id: heure_depart
+    min_value: 0
+    max_value: 59
+    step: 1
+    restore_value: True
+    initial_value: 8
+    unit_of_measurement: s
+    mode: box
+    optimistic: True
+    icon: mdi:clock-start
+    web_server_sorting_weight: 20
+
+  - platform: template
+    name: "Durée de base"
+    id: duree_debase
+    min_value: 0
+    max_value: 60
+    step: 1
+    restore_value: False
+    initial_value: 0
+    unit_of_measurement: s
+    optimistic: True
+    internal: True
+
+  - platform: template
+    name: "Durée filtration H/j"
+    id: duree
+    min_value: 0
+    max_value: 60
+    step: 1
+    restore_value: False
+    initial_value: 0
+    unit_of_measurement: s
+    mode: SLIDER
+    optimistic: True
+    entity_category: config
+    icon: mdi:fan-clock
+    web_server_sorting_weight: 25
+
+  - platform: template
+    name: "Heure actuelle"
+    id: heure
+    internal: True
+    min_value: 0
+    max_value: 59
+    step: 1
+    unit_of_measurement: s
+    optimistic: True
+
+  - platform: template
+    name: "Heure fin filtration"
+    id: heure_fin
+    internal: True
+    min_value: 0
+    max_value: 59
+    step: 1
+    unit_of_measurement: s
+    optimistic: True
+
+select:
+  - platform: template
+    name: "Mode"
+    id: mode
+    optimistic: true
+    options:
+      - Forcé
+      - Intensif
+      - Normal
+      - Économique
+      - Arrêt
+    initial_option: Normal
+    icon: mdi:power
+    web_server_sorting_weight: 2
+    on_value:
       then:
-      if:
+        - lambda: |-
-        condition:
+            if (id(mode).state == "Intensif") {
-          wifi.connected:
+              id(duree).state = id(duree_debase).state + 2;
-        then:
+              if (id(duree).state > 59) {
-          - light.turn_on: wifi_status_led
+                id(duree).state = 60;
-        else:
+              }
-          - light.turn_off: wifi_status_led
+            }
+            if (id(mode).state == "Normal") {
+              id(duree).state = id(duree_debase).state;
+            }
+            if (id(mode).state == "Économique") {
+              id(duree).state = id(duree_debase).state - 2;
+              if (id(duree).state < 0) {
+                id(duree).state = 0;
+              }
+            }
 
 time:
   - platform: sntp
-    # ...
+    id: sntp_time
-    on_time:
+    timezone: Europe/Paris
-      # Every 5 minutes
+    servers:
-      - seconds: /5
+     - 0.pool.ntp.org
-        #minutes: /5
+     - 1.pool.ntp.org
-        then:
+     - 2.pool.ntp.org
-          - switch.toggle: ${name}_ext_led
 
-      # Every morning on weekdays
-      - seconds: 0
-        minutes: 30
-        hours: 7
-        days_of_week: MON-FRI
-        then:
-          - light.turn_on: wifi_status_led
 
-      # Cron syntax, trigger every 5 minutes
+interval:
-      - cron: '00 /5 * * * *'
+  - interval: 1s
     then:
-          - switch.toggle: ${name}_ext_led
+      - lambda: |-
+          if (id(mode).state == "Forcé") {
+              id(mainRelayVirt).turn_on();
+          }
+
+          if ((id(mode).state == "Normal") || (id(mode).state == "Économique") || (id(mode).state == "Intensif")) {
+            if (id(sntp_time).now().second == (id(heure_depart).state)) {
+              id(duree_debase).state = (id(${name}_temp).state / 2);
+              id(duree).state = id(duree_debase).state;
+            }
+
+            ESP_LOGI("main", "Heure de début: %.0f", id(heure_depart).state);
+            id(heure_fin).state = id(heure_depart).state + (id(duree).state) -1;
+            ESP_LOGI("main", "Heure de fin: %.0f", id(heure_fin).state);
+            if (id(heure_fin).state > 59) {
+              id(heure_fin).state = id(heure_fin).state - 60;
+            }
+            ESP_LOGI("main", "Heure de fin: %.0f", id(heure_fin).state);
+            if (id(heure_fin).state >= id(heure_depart).state) {
+              if (((id(sntp_time).now().second) >= (id(heure_depart).state)) and ((id(sntp_time).now().second) <= (id(heure_fin).state))) {
+                id(mainRelayVirt).turn_on();
+              }
+              else {
+                id(mainRelayVirt).turn_off();
+              }
+            }
+            else {
+              if ((id(sntp_time).now().second) >= (id(heure_depart).state)) {
+                id(mainRelayVirt).turn_on();
+              }
+              else {
+                if ((id(sntp_time).now().second) <= (id(heure_fin).state)) {
+                  id(mainRelayVirt).turn_on();
+                }
+                else {
+                  id(mainRelayVirt).turn_off();
+                }
+              }
+            }
+          }
+
+          if (id(mode).state == "Arrêt") {
+              id(mainRelayVirt).turn_off();
+          }