Horloge_Nixie_firmware/nixie.cpp

#include "esp32-hal-gpio.h"
#include "nixie.h"
#include "Arduino.h"
#include "hardware.h"

void printNixie1(int8_t a) {
  switch (a) {
    case 0:
      digitalWrite(BCD_D, LOW);  //D
      digitalWrite(BCD_C, LOW);  //C
      digitalWrite(BCD_B, LOW);  //B
      digitalWrite(BCD_A, LOW);  //A
      digitalWrite(NX1A, 1);     //Switch ON Anode Nixie 1
      break;
    case 1:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 2:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 3:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 4:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 5:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 6:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 7:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 8:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    case 9:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX1A, 1);      //Switch ON Anode Nixie 1
      break;
    default:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX1A, 0);      //Switch OFF Anode Nixie 2
      break;
  }
}

void printNixie2(int8_t a) {
  switch (a) {
    case 0:
      digitalWrite(BCD_D, LOW);  //D
      digitalWrite(BCD_C, LOW);  //C
      digitalWrite(BCD_B, LOW);  //B
      digitalWrite(BCD_A, LOW);  //A
      digitalWrite(NX2A, 1);     //Switch ON Anode Nixie 2
      break;
    case 1:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 2:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 3:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 4:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 5:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 6:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 7:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 8:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    case 9:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX2A, 1);      //Switch ON Anode Nixie 2
      break;
    default:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX2A, 0);      //Switch off Anode Nixie 2
      break;
  }
}

void printNixie3(int8_t a) {
  switch (a) {
    case 0:
      digitalWrite(BCD_D, LOW);  //D
      digitalWrite(BCD_C, LOW);  //C
      digitalWrite(BCD_B, LOW);  //B
      digitalWrite(BCD_A, LOW);  //A
      digitalWrite(NX3A, 1);     //Switch ON Anode Nixie 3
      break;
    case 1:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 2:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 3:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 4:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 5:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 6:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 7:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 8:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    case 9:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX3A, 1);      //Switch ON Anode Nixie 3
      break;
    default:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX3A, 0);      //Switch off Anode Nixie 3
      break;
  }
}

void printNixie4(int8_t a) {
  switch (a) {
    case 0:
      digitalWrite(BCD_D, LOW);  //D
      digitalWrite(BCD_C, LOW);  //C
      digitalWrite(BCD_B, LOW);  //B
      digitalWrite(BCD_A, LOW);  //A
      digitalWrite(NX4A, 1);     //Switch ON Anode Nixie 4
      break;
    case 1:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 2:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 3:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 4:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 5:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 6:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 7:
      digitalWrite(BCD_D, LOW);   //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 8:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, LOW);   //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    case 9:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, LOW);   //C
      digitalWrite(BCD_B, LOW);   //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX4A, 1);      //Switch ON Anode Nixie 4
      break;
    default:
      digitalWrite(BCD_D, HIGH);  //D
      digitalWrite(BCD_C, HIGH);  //C
      digitalWrite(BCD_B, HIGH);  //B
      digitalWrite(BCD_A, HIGH);  //A
      digitalWrite(NX4A, 0);      //Switch off Anode Nixie 4
      break;
  }
}